Re: [R] invalid \uxxxx sequence while trying to create a package

From: Charles Annis, P.E. <Charles.Annis_at_statisticalengineering.com>
Date: Sat, 22 Mar 2008 13:35:15 -0400

Thank you, Professor Ripley!

LazyLoad:FALSE in my DESCRIPTION file was the charm!

(It took a bit of looking to determine the correct syntax. A search for "lazyloading" in "Writing R Extensions" was a red herring, but a search on CRAN suggesting "lazy loading" - obvious in hindsight, of course - sent me back to "Writing ..." and the correct syntax.)

Thank you very much for the rescue. (I will revisit lazy loading when R-2.7.0 arrives.)

Again, my sincere gratitude!

Charles Annis, P.E.

Charles.Annis_at_StatisticalEngineering.com phone: 561-352-9699
eFax: 614-455-3265
http://www.StatisticalEngineering.com  

-----Original Message-----
From: r-help-bounces_at_r-project.org [mailto:r-help-bounces_at_r-project.org] On Behalf Of Prof Brian Ripley
Sent: Saturday, March 22, 2008 3:50 AM
To: Duncan Murdoch
Cc: r-help_at_r-project.org; Charles.Annis_at_statisticalengineering.com Subject: Re: [R] invalid \uxxxx sequence while trying to create a package

Now, I wonder who Duncan meant by

    'one person on the list who can diagnose the problem'

?

Hint: small packages are not selected for lazyloading, so do your example with lazy loading set in the DESCRIPTION file.

If I do that, the example runs in R-devel but not in 2.6.2. It is a locale issue: the C locale is used where that sequence is not valid. (This is necessary: it is not valid in Japanese either and the run-time locale need not be the same as the install-time locale -- fortunately for the distribution of binary packages.)

I would suggest that you do not use \uxxxx sequences on Windows until 2.7.0. Here \xe2 will work equally well, or if you want to be as portable as possible iconv("\xe2", "latin1", ""). Or turn lazyloading off and rely on run-time parsing.

On Fri, 21 Mar 2008, Duncan Murdoch wrote:

> On 21/03/2008 6:01 PM, Charles Annis, P.E. wrote:

>> I'm running R2.6.2 on a DELL box with 2gig RAM, using Rtools (v26).
>>
>> I have a perplexing problem trying to build a package.
>>
>> I've created a small demonstration:
>>
>> problem.demo <- function ()
>> {cat("\n *** \u00e2 vs a ***\n")}
>>
>>
>> This function runs in an R gui session and Rtools makes a simple package
>> containing it alone or with a handful of similar routines.
>>
>> However, when I include it with a much bigger package (that Rtools has no
>> trouble in packaging without it), the result is an invalid \uxxxx
sequence:
>>
>> Compile time: 0 minutes, 3 seconds
>> 171 Topics
>> 342 Local links
>> 171 Internet links
>> 1 Graphic
>>
>>
>> Created
>> c:\DOCUME~1\CHARLE~1\LOCALS~1\Temp\Rbuild406495938\mh1823\chm\mh1823.chm,
>> 149,803 bytes
>> Compression decreased file by 398,668 bytes.
>> preparing package mh1823 for lazy loading
>> Loading required package: rcom
>> Loading required package: RODBC
>> Loading required package: RColorBrewer
>> Loading required package: survival
>> Loading required package: splines
>> Error in parse(n = -1, file = file) : invalid \uxxxx sequence
>> Calls: <Anonymous> -> code2LazyLoadDB -> sys.source -> parse
>> Execution halted
>> make: *** [lazyload] Error 1
>> *** Installation of mh1823 failed ***
>>
>> Removing 'C:/DOCUME~1/CHARLE~1/LOCALS~1/Temp/Rinst406445831/mh1823'
>>
>> Clearly I am overlooking something obvious, so I would greatly appreciate
>> any guidance.
>
> The general rules apply.
>
> "Make it reproducible".
>
> You've done that for yourself, but you haven't given instructions that
> let anyone else reproduce it.
>
> If you simplify your example to a minimal one that reproduces the error,
> there's a good chance you'll spot what is wrong:  but if not, there's a
> good chance someone else will be able to.
>
> If you post error messages without the code that causes them, there
> might be one person on the list who can diagnose the problem, but he's
> awfully busy.  Post complete instructions for reproducing it.
>
> Duncan Murdoch
>
> ______________________________________________
> R-help_at_r-project.org mailing list
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide

http://www.R-project.org/posting-guide.html > and provide commented, minimal, self-contained, reproducible code. >
-- 
Brian D. Ripley,                  ripley_at_stats.ox.ac.uk
Professor of Applied Statistics,  http://www.stats.ox.ac.uk/~ripley/
University of Oxford,             Tel:  +44 1865 272861 (self)
1 South Parks Road,                     +44 1865 272866 (PA)
Oxford OX1 3TG, UK                Fax:  +44 1865 272595

______________________________________________
R-help_at_r-project.org mailing list
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.

______________________________________________
R-help_at_r-project.org mailing list
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
Received on Sat 22 Mar 2008 - 18:53:30 GMT

Archive maintained by Robert King, hosted by the discipline of statistics at the University of Newcastle, Australia.
Archive generated by hypermail 2.2.0, at Sat 22 Mar 2008 - 19:31:18 GMT.

Mailing list information is available at https://stat.ethz.ch/mailman/listinfo/r-help. Please read the posting guide before posting to the list.

list of date sections of archive